Hinges  

Stanley Security Solutions  

A divisions of Stanley Security Solutions 

     
  5 Knuckle Swing Clear Hinges

5 Knuckle Hinge Design | 5 Knuckle FBB Full Mortise Hinges | 5 Knuckle FBB Half Surface Hinges | 5 Knuckle FBB Half Mortise Hinges | 5 Knuckle FBB Full Surface Hinges | 5 Knuckle FBB Slip-In Hinges | 5 Knuckle FBB Pivot Reinforced Hinges | 5 Knuckle Swing Clear Hinges | 5 Knuckle Plain Bearing Hinges | Conversion Tips & Pins

 
 
 

Standard Weight Plain Bearing “Swing Clear” Full Mortise

F248 – (ANSI A8123) Steel – polished and plated or phosphated and prime coated for painting

  • Equipped with easily seated non-rising pins
  • Reversible flush tips and pins
  • Ideal for remodeling or new construction
  • Available for full mortise application on square edge doors only
  • Designed to replace existing 3 1/2" (89mm) or 4" (102mm) hinges for Swing Clear openings (some preparation modification typically required for residential use)
  • Designed to swing doors completely clear of the opening when door is opened 95°

 

 

 

 

 

 
 

 

 
 

Standard Weight Ball Bearing “Swing Clear” Full Mortise

Steel – polished and plated or phosphated and prime coated for painting

FBB248 – (ANSI A8122)
FBB258 – (ANSI A8122)

Stainless Steel – highly polished or
satin finish

STSFBB248 – (ANSI A5122)
STSFBB258 – (ANSI A5122)

  • Reversible flush tips and pins
  • Ideal for remodeling or new construction
  • Specify FBB248 and STSFBB248 for full mortise application on square edge doors
  • Specify FBB258 and STSFBB258 for full mortise application on bevel edge doors
  • Designed to swing doors completely clear of the opening when door is opened 90°
  • Equipped with two Stanley permanently lubricated non-detachable ball bearings
  • Hinges can be furnished with hospital tips (HT)

FBB248 (Shown) and STSFBB248
{For square edge doors}

FBB258 and STSFBB258
{For doors beveled 1/8" in 2" (3.2 in 51mm)}

 
 

 

 
 

Heavy Weight Ball Bearing “Swing Clear” Hinge

Steel – polished and plated or phosphated and prime coated for painting

FBB268 – (ANSI A8121)
FBB278† – (ANSI A8121)
FBB269 – (ANSI A8421)
FBB264 – (ANSI A8221)
FBB274† – (ANSI A8221)
FBB266 – (ANSI A8321)

Stainless Steel – highly polished or
satin finish

STSFBB268 – (ANSI A5121)
STSFBB278† – (ANSI A5121)
STSFBB269 – (ANSI A5421)
STSFBB264 – (ANSI A5221)
STSFBB274† – (ANSI A5221)
STSFBB266 – (ANSI A5321)

  • For corridor doors to patients’ rooms, operating rooms, emergency rooms, or wherever conditions require a completely clear opening in hospitals, institutions or public buildings
  • Designed to swing door completely clear of the opening when door is opened 95°
  • Consult factory for hinges available to clear 90°
  • Equipped with four Stanley permanently lubricated non-detachable ball bearings
  • Pins in nonferrous hinges are stainless steel
  • Heavy weight gauges increase available bearing surface area for maximum friction reduction
  • Hinges can be furnished with hospital tips
  • Full surface and half surface hinges packed with flat head machine screws and grommet nuts for door leaf, specify door thickness
  • Consider using a back plate on full surface and half surface hinges
  • For half mortise and full surface hinges to fit narrow metal frames, consult factory
  • Reversible flush tips and pins
Full Mortise - FBB268 and STSFBB268
{For square edge doors} (shown)

FBB278† and STSFBB278† FBB266 and STSFBB266
{For doors beveled 1/8" in 2" (3.2 in 51mm)}
Half Surface
FBB269
and STSFBB269
Half Mortise
For Channel Iron Frames
FBB264 and STSFBB264
{For square edge doors} (shown)

FBB274† and STSFBB274†
{For doors beveled 1/8" in 2" (3.2 in 51mm)}
Full Surface
For Channel Iron Frames FBB266 and STSFBB266

 
 
Catalog
 

 

ANSI & BHMA
 

 

Maintenance Instructions
Maintenance of F and FBB hinges
As a general rule, hinges are to be lubricated every six months. Use Shell Darina #2 or equivalent heavy bearing grease*. Wipe excess grease and dirt from hinge.

This is a general procedure and it should be recognized that high use of door openings or exterior applications may demand more frequent servicing.

* To lubricate hinges, extract pins and wipe or dip with grease. Reinsert pin. Grease will work into load bearing surfaces. Wipe excess grease and dirt from hinge.
 

   
  © 2006 Stanley Security Solutions, Inc.
6161 East 75th Street | Indianapolis, IN | 46250
Tel 317 849 2250